EMC, Dell Combine iSCSI with Fibre Channel - EnterpriseStorageForum.com

EMC, Dell Combine iSCSI with Fibre Channel

EMC and Dell are combining forces — and storage protocols — in a new midrange storage offering.

The CX3-10 UltraScale FC/iSCSI system marks a new entry point with EMC's Clariion machines for mid-sized customers.

Designed to sock away data in businesses with anywhere from 250 to 2,500 employees, the CX3-10 is geared to handle the glut of data in e-mail applications, such as Microsoft Exchange, or enterprise resource planning apps from the likes of Oracle and SAP.

The trick is to meet such requirements at a reasonable cost, a balancing act that EMC, Dell and rivals HP, IBM, NetApp and others have been trying to pull off in the multi-billion-dollar midrange SAN market.

"Although these mid-size business have big requirements — information in these businesses is growing rapidly — they may not have big staffs or big budgets," said Katie Curtin-Mestre, director of Clariion product marketing at EMC. "Our focus at EMC is economical solutions for these mid-size enterprises."

The CX3-10 supports both Fibre Channel and iSCSI connectivity. This combination is an important selling point for customers because traditional machines don't support both on the same machine, forcing business to buy separate machines to manage Fibre Channel or the lower-cost iSCSI protocols.

Because of its lower cost, iSCSI presents an attractive entry point for customers moving into block-based networked storage from file-based network-attached storage (NAS) or direct-attached storage (DAS) for the first time.

EMC began offering iSCSI and Fibre Channel support on its CX3-20, CX3-30, CX3-40 and CX3-80 UltraScale systems last October.

The CX3-10, which spans from 5 to 60 drives and stores up to 30 terabytes of data, also includes EMC's Navisphere Task Bar to make managing the box a snap for moderately tech-savvy users who can't look to a storage administrator for help.

Replication software for non-disruptive backup, PowerPath load balancing and path-failover software, an option for all-SATA configurations and an option to procure low-cost Fibre Channel Host Bus Adapters HBAs) are also part of the CX3-10 package.

The CX3-10 starts at $27,000.

Mestre said EMC has also issued RecoverPoint/SE, a version of the company's long-distance disaster recovery software that supports CLARiiON CX and CX3 systems.

RecoverPoint/SE also features a bandwidth-reduction option that helps customers pare their replication costs by reducing the amount of data sent over the line by up to a factor of 10, yielding significant cost savings. The product is for Windows hosts between Clariions and supports up to 4 terabytes of capacity.

RecoverPoint/SE is $10,000 per array.

Dell is offering its own version of the machine, branded the Dell/EMC CX3-10c, according to Praveen Asthana, Dell's director of storage.

"When we came out with the CX3-20, CX3-30, CX-40 with EMC, we noticed a gap between the DAS products and the CX line, so we worked with EMC to come out with the CX3-10," Asthana said.

To accompany the CX3-10c, Dell today issued two new tape libraries, the PowerVault TL 2000 and the PowerVault TL4000, to provide automated data protection at a cost of traditional autoloaders.

The pairing of a CX3-10c with the TL2000 or TL4000 will help users consolidate storage systems and handle growing capacity needs.

Article courtesy of Internet News


Comment and Contribute

 


(Maximum characters: 1200). You have characters left.

 

 

Storage Daily
Don't miss an article. Subscribe to our newsletter below.

Thanks for your registration, follow us on our social networks to keep up-to-date